- or
No existing idea results
- ~ No ideas found ~
1297 results found
-
Two factor authentication support for admin
For security reasons it will be favorable to add native Two factor authentication support in the admin.
10 votes -
Lock against multiple sending of custom forms
When using a very extensive custom form, the customer experienced a delay after clicking on Send. He was able to click on the button several times, as a result of which the form data was also sent several times by email. The customer's suggestion is to deactivate the respective buttons after submitting and then reactivate them when a result is achieved.
This would be a useful addition, as it would prevent any errors in the event of delays in the response.
Beim Einsatz einer sehr umfangreichen Custom Form kam es beim Kunden zu einer Verzögerung, nachdem der Shopkunde auf Absenden geklickt hatte. Dabei konnte er mehrmals auf den Button klicken, wodurch die Daten des Formulars ebenfalls merhmals per Mail verschickt wurden. Der Vorhschlag des Kunden ist, die jeweiligen Buttons nach dem Absenden zu deaktivieren und dann bei einem Ergebnis wieder zu aktivieren.
Da es bei Verzögerungen zur Rückmeldung etwaige Fehler verhindern würde, wäre das eine sinnvolle Ergänzung.When using a very extensive custom form, the customer experienced a delay after clicking on Send. He was able to click on the button several times, as a result of which the form data was also sent several times by email. The customer's suggestion is to deactivate the respective buttons after submitting and then reactivate them when a result is achieved.
This would be a useful addition, as it would prevent any errors in the event of delays in the response.
Beim Einsatz einer sehr umfangreichen Custom Form kam es beim Kunden zu einer Verzögerung, nachdem der Shopkunde auf Absenden…
3 votes -
Assign Dynamic Access as multiple change products.
It is currently the case that Dynamic Access cannot be assigned via the multiple change.
This would be an important feature, as if you want to set the visibility of several products via Dynamic Access, you currently have to navigate to each product individually in order to store the rule there.3 votes -
Select customer to preview dynamic product groups
In the case of a dynamic product group, the default values such as customer group etc. are always displayed in the preview. A dynamic product group, which should output products for customers with a specific additional field, does not display these. It would be desirable to be able to add a customer to the preview selection. This would make the preview options much more precise.
1 vote -
increase "Entry per page" in customer overview
Should be instead of: 10, 25, 50, 75, 100
New: 50, 100, 200
Default should be 100.
Why: to see more customers at once and on larger resolution display (higher that FullHD) it is not a problem to see 200 customers at once.
17 votes -
Support promotions / discounts in when requesting a quote
Currently, you cannot request a quote as long as there is an active promotion in your cart.
4 votes -
Country switch in shopping cart
I noticed that, when I enter the shopping cart and select a different country, the standard shipping remains preselected, although it should switch to that for the respective countries. When entering the address at the checkout, however, only the correct shipping method can be selected again, which means that customers might be initially confused. Maybe a fix for that would be nice
5 votes -
A graph showing the revenue (Money earned)
I just launched a webshop and the analytics plugin is great.
But there is one graph that I miss on the dashboard.I would like to see a extra graph for the revenue made per day.
A graph like the sales total but then with the revenue.
This can be based of of the purchase price per product.And ofcourse of the purchase price is not entered on the product the item can be ignored.
2 votes -
Make favorite block category default in sidebar when blocks are marked as favorites
Using cms block favorites would be more efficient, when the favorites block category is openend by default on cms page editing, instead of first one (text)
1 vote -
AI Copilot | product properties: Translate properties for all available languages
It would be great, if all suggested properties would be translated for all available languages. This saves the manual effort of having to add the translations for those properties manually.
This is especially important for international shops selling in multiple countries with different languages.
2 votes -
flowbuilder - flow can trigger a flow
It would be nice if one could trigger a flow from within another flow.
This would give the option to implement the programming concept of "functions" within the flowbuilder.
Our problem is, that our order placed flow is rather complex with a lot of rule checks,
it would be nice to split the trees up into differnt flows, that could be triggered.Other example, you have a flow "send discount code and tag customer"-flow, which could be used in different flows without the need to rewrite the actions.
7 votes -
Individual tax calculation: Tax calculation based on the country of delivery
Shopware always calculates the tax based on the country of delivery. There are always enquiries from customers in support where the tax has to be calculated based on the country of dispatch. This is not currently mapped in Shopware, but is being requested more and more frequently.
Therefore, an adjustment or option for tax calculation would be advantageous here in order to be able to map more scenarios.
3 votes -
API: Status of E-Mail
Setzen der Status der einer E-Mail versand/nicht versandt nach Dokumentart an der Bestellung per API
Set the status of an email sent/not sent by document type on the order via API
3 votes -
Optimization of plugin management and configuration in Shopware 6 Admin
We are having difficulties finding and managing the apps and plugins installed in Shopware 6 within the admin area. Since many standard features from SW5 have been removed and must now be replaced by apps, there is no central overview for these extensions. The apps are spread out across different sections, without a clear indication of which plugin provides which functionality. This leads to issues with managing and identifying extensions.
Note from Shopware Support:
We think it's a very good idea. For many colleagues in support, it is often very difficult to find out which plugin inserts which functions and where these are configured.Main Issues:
Scattered Apps: Apps are spread out across various sections of the admin area (e.g., Marketing, System, Settings), making them difficult to find.
No Clear Function Assignment: After installation, it is often unclear which plugin is responsible for which function. Only after disabling a plugin does it become apparent what it was doing.
Challenges with CMS Plugins: With multiple CMS plugins active at the same time, it’s almost impossible to figure out which plugin is being used in which Shopping Experience without manually testing each one.
Shopify Example:
We find that Shopify has a clear structure where all apps are centrally located under one "Apps" section, with direct access to configuration, making it super easy to manage.Use Cases for Clarification:
1 - Finding an App:
If i want to configure a recently installed plugin. However, it is scattered across the admin area (e.g., partly under Marketing, partly under System), and there is no central overview. The user wastes time searching for the app.Use Case 2 - Unclear Function Assignment:
As a shop owner, i noticed a functionality in our shop (e.g., "Products in saved shopping carts" under Marketing) but does not know whether it’s part of the core system or added by a plugin. Suggestion: Clearly indicate which function is provided by which plugin.Wanted improvements:
Introduce a central "Plugin" section where all installed extensions are listed and can be configured.
Clearly label in the admin area which functions belong to which plugins. Maybe with an Icon and text on hover.
Improve the identification of CMS plugins within Shopping Experiences.
We are having difficulties finding and managing the apps and plugins installed in Shopware 6 within the admin area. Since many standard features from SW5 have been removed and must now be replaced by apps, there is no central overview for these extensions. The apps are spread out across different sections, without a clear indication of which plugin provides which functionality. This leads to issues with managing and identifying extensions.
Note from Shopware Support:
We think it's a very good idea. For many colleagues in support, it is often very difficult to find out which plugin inserts which functions and…3 votes -
Improve loading times (for example by using correct values for the sizes attribute of thumbnails)
Shopware uses wrong values for the sizes attribute of thumbnails. Therefore bigger images are downloaded than shown. This increases the loading times.
It is not useful to download a thumbnail of 400 x 400 pixels if you show an image with 200 x 200 pixels.
If this is fixed you no longer need https://store.shopware.com/en/frosh56163799233f/lazysizes-and-lazyloading-for-suitable-image-sizes.html.
Shopware shows images of 430 x 430 pixels on product detail pages by default. Therefore thumbnails with 430 x 430 pixels should be created. On product detail pages the 400 x 400 pixels big thumbnails are not used for the normal product images and way too big images are downloaded.
These 2 problems increase loading times, waste server capacities and frustrate visitors and shop owners.
Shopware uses wrong values for the sizes attribute of thumbnails. Therefore bigger images are downloaded than shown. This increases the loading times.
It is not useful to download a thumbnail of 400 x 400 pixels if you show an image with 200 x 200 pixels.
If this is fixed you no longer need https://store.shopware.com/en/frosh56163799233f/lazysizes-and-lazyloading-for-suitable-image-sizes.html.
Shopware shows images of 430 x 430 pixels on product detail pages by default. Therefore thumbnails with 430 x 430 pixels should be created. On product detail pages the 400 x 400 pixels big thumbnails are not used for the normal product images and way…
4 votes -
Total of all products without list prices
There should be a condition in the rulebuilder for the total sum of all products that not have a list price. So that promotions can refer exclusively to non-discounted products.
1 vote -
Clean up guest accounts after order is proceeded
Some Online Merchants suffer from recurring guest accounts, cluttering the database. It would be good to have some kind of a configurable mechanism to delete guest accounts after the order is proceeded or after a specific time (month, years).
This feature request is discussed quite frequently, for example here in the forums (German): https://forum.shopware.com/t/gastkonten-automatisiert-loeschen/94778/24 votes -
Possibility for the customer to filter products according to availability in the storefront
Possibility for the customer to filter products according to availability
1 vote -
Remove cookie setting “Google advertising and marketing”
We have updated our store to version 6.5.8.7 today due to the 404 security vulnerability. Now the option “Marketing > Google Advertising and Marketing” appears in the cookie settings, which was probably added with the adjustment NEXT-32925 - Add Google Consent V2 in version 6.5.8.6. However, we do not use tracking (especially not from Google), so displaying the setting makes no sense, may even raise additional customer questions and has a bad aftertaste. I don't like the fact that the option simply appears unasked after the update in the cookie settings in the storefront - especially since you are forced to make the update, as it was not included as a patch in the security plugin (if I have understood this correctly)... Unfortunately, I have not found a way to hide the option. It would make sense if the option is not displayed at all if you have not stored a tracking ID in the sales channel.
https://forum.shopware.com/t/cookie-einstellung-google-werbung-und-marketing-entfernen/103280
We have updated our store to version 6.5.8.7 today due to the 404 security vulnerability. Now the option “Marketing > Google Advertising and Marketing” appears in the cookie settings, which was probably added with the adjustment NEXT-32925 - Add Google Consent V2 in version 6.5.8.6. However, we do not use tracking (especially not from Google), so displaying the setting makes no sense, may even raise additional customer questions and has a bad aftertaste. I don't like the fact that the option simply appears unasked after the update in the cookie settings in the storefront - especially since you are forced…
1 vote -
The default country should be preselected during registration.
The default country should be preselected during registration, or at least there should be an option to set this.
2 votes
- Don't see your idea?