- or
No existing idea results
- ~ No ideas found ~
1345 results found
-
Bunch of new conditions for the Rule Builder
There are missing a lot of conditions that would be very helpful in the Rule Builder, for example:
- order placed by a customer in frontend or manual order by admin in the backend
- order has a document xy (to check e.g. if invoice has been already generated)
- more entities with custom fields as condition, for example "Order with custom field" or "Payment / shipping method with custom field"
- and a lot more4 votes -
B2B Suite address management
Currently the B2B Suite has the same address fields as the B2C storefront
but it should have some additional fields/options on the different places
to adapt B2B specific needs for addresses (e.g. tax numbers, country display etc.).
Also, it is not possible to edit addresses during the checkout process.17 votes -
Adminsearch: ETA for keypress in admin is quite too short
When I want to enter a search term in a search field of a form in the admin, I hardly have time to type in a complete search term. The time after pressing the key until the search is triggered gives me a maximum of (perceived) 200 milliseconds. For example, if I want to search for the word "Man", a brief hesitation leads to the content being deleted after entering "M" and then entering "A" leads to a completely different search result.
At some points, the edit field also loses focus, so that I have to keep clicking in the field again in order to make the entry again.
The AI Copilot was not active.
When I want to enter a search term in a search field of a form in the admin, I hardly have time to type in a complete search term. The time after pressing the key until the search is triggered gives me a maximum of (perceived) 200 milliseconds. For example, if I want to search for the word "Man", a brief hesitation leads to the content being deleted after entering "M" and then entering "A" leads to a completely different search result.
At some points, the edit field also loses focus, so that I have to keep clicking in the…
1 vote -
No space between unfilled content blocks in the frontend
We sometimes have the same layouts selected as templates in some categories. In a few category pages content blocks are not filled. But then there are big gaps. So if the content is empty, the space between the blocks should decrease automatically.
2 votes -
Multiple Shipping Addresses
The multiple-address shipping options enable customers to ship an order to multiple addresses during checkout. Each product from the order can be shipped to a different address.
1 vote -
Shopping Experiences: new element: notice boxes with green, red, yellow, blue frames and text inside
EN:
Please add a new element to create notice boxes with green, red, yellow, blue frames and text inside.DE
Bitte erstellen Sie ein weiteres Element in den Erlebniswelten mit Hinweisfelder mit grünen, roten, gelben, blauben Rahmen und Möglichkeit Text zu hinterlegen.1 vote -
Shopping Experiences: new picture setting images with rounded corners (radius adjustable)
EN:
Please add the option to setting images with rounded corners (radius adjustable)DE
Bitte erweitern Sie die die Bildemelemente um die Funktion der abgerundete Ecken mit einstellbaren Radius.1 vote -
Scheduled publishing for CMS
For campaign dates, new product releases, weekend activities, etc. a scheduling feature of pages should be integrated
17 votes -
Edit content of assignments in pagebuilder
Until now, it's only possible to edit the base content of the layout in the page builder, while the category-specific content can only be edited in the layout tab in the categories.
Example: I use a base layout as a template for all my shop categories. However, I want to play out different content for the jewellery category than for the clothing category. I am using data mapping to do so, which automatically overwrites the content from my layout with the content in the category.It would be easier if one can switch through all the assignments & edit the different content of the assignments in the page builder.
Until now, it's only possible to edit the base content of the layout in the page builder, while the category-specific content can only be edited in the layout tab in the categories.
Example: I use a base layout as a template for all my shop categories. However, I want to play out different content for the jewellery category than for the clothing category. I am using data mapping to do so, which automatically overwrites the content from my layout with the content in the category.It would be easier if one can switch through all the assignments & edit the…
18 votesInitial status update
-
Migration Assistant wrongly configures products with variants
After using the Migration Assistant, the 'buy button' is shown in the product listing page even when a product has multiple variants and the main variant has stock>0. Only when the main product stock=0, the 'details' button is shown. In case of variants, the 'details' button should always be shown in listing pages, as without the customer will buy the main product when clicking on the 'buy button'.
Cause: the radio-button 'main product' in the Shopware 6 backend that forces to show the 'detail' button in frontend in case of multiple variants, is not selected after migration. Normally, you have to select 'main product' or 'variant', it's not possible to leave both unselected. See screenshot.
Shopware Support agrees that it doesn't function as could be expected and suggested to correct directly in the database (if you have the knowledge 'how to'). But in fact it can be considered as 'bug' in the Migration Assistant as it doesn't respect essential settings in Shopware 5 properly.
After using the Migration Assistant, the 'buy button' is shown in the product listing page even when a product has multiple variants and the main variant has stock>0. Only when the main product stock=0, the 'details' button is shown. In case of variants, the 'details' button should always be shown in listing pages, as without the customer will buy the main product when clicking on the 'buy button'.
Cause: the radio-button 'main product' in the Shopware 6 backend that forces to show the 'detail' button in frontend in case of multiple variants, is not selected after migration. Normally, you have…
1 vote -
Cloud: Deactivating the e-mail function
If you import customers, for every customer will be sent a registration mail. You can't deactivate the mailer in the cloud to prevent this.
There will be need an option. Here, not every customer may receive a mail again.
1 vote -
Use lowercase for URL
URLs are (from the domain) casesensitiv ("/Clothing" theoretically is sth different than "/clothing") . Shopware corrects that and therefore it´s possible to open any spelling within URLS (e.g. "/cLoThInG" instead of "/clothing"). Within the preview we explicitly spend "/Clothing" as a canonical-URL. Every URL should be lowercase by default.
17 votes -
Save & share shopping basket
As B2B customers oftentimes work collaboratively and on a frequent basis with their orders it is handy to have the possibility to save and share shopping baskets with other colleagues.
9 votes -
Make it possible to change country settings in bulk
Currently, when you install Shopware, the country and tax configuration is very basic. This is of course because there is no "right" state that covers every scenario for every shop and this should be looked at and configured by every merchant depending on their circumstances.
However, currently, this requires touching up every single country you plan to do business in individually, which is a lot of work.
Most shops would probably be able to deactivate taxes for all countries in general and then touch up the ones where they cannot do this - this would be a lot less work. Just as an example.
It would be nice if you were able to do this with a bulk edit, which we already use in many other places.
Alternatively, being able to assign countries as we allowed in Shopware 5 - to EU and World for example - would aid a bit in this regard. At the very least, we'd have the ability to change them in the database based on the values in there. It would also open up the possibility to do taxation via our Rule Builder, like
If delivery address in country group | World | Set Taxfree (b2c) to 1
Currently, when you install Shopware, the country and tax configuration is very basic. This is of course because there is no "right" state that covers every scenario for every shop and this should be looked at and configured by every merchant depending on their circumstances.
However, currently, this requires touching up every single country you plan to do business in individually, which is a lot of work.
Most shops would probably be able to deactivate taxes for all countries in general and then touch up the ones where they cannot do this - this would be a lot less work.…
2 votes -
Introduce an seo_url_history DB table
Usually, SEO URLs will be generated from product titles. This is a brilliant idea as long as there will be no changes: If the customer changes the title of a product item, the URL changes as well (in case of typos, when re-indexing? Untested, please check first). It becomes a mess with regular imports when titles of items change on a regular basis.
For these cases, it is good to have a so called seourlhistory table in the database which will be checked first and redirects via 301 to the new location.
Even if one imports from another system, URLs could be imported to the seourlhistory table redirecting to the new location, no matter how these may look like ;)
BTW: Accept of OXID, nobody else might have a feature like this ;)
Usually, SEO URLs will be generated from product titles. This is a brilliant idea as long as there will be no changes: If the customer changes the title of a product item, the URL changes as well (in case of typos, when re-indexing? Untested, please check first). It becomes a mess with regular imports when titles of items change on a regular basis.
For these cases, it is good to have a so called seourlhistory table in the database which will be checked first and redirects via 301 to the new location.
Even if one imports from another…
7 votes -
The possibility to see the whole name of the rules that are used.
A super nice feature ..
It would be very good to get the possibility to see the whole name of the rules that are used. Either the name listed or shown when you hover over. (this applies across all admin)
See the pictures for examples
2 votes -
Double Opt-in for changes in the customer account
Enable double opt-in for changes within the customer account, e.g, if the mail address or other base data is changed.
This should, however, be an optional feature.1 vote -
Promotions: Show only rule builder conditions that fits to the selected rule type
In the promotions you can create "Customer rules, Shopping cart rules, Order rules, Product rules". But not every selected rule condition fits to the selected type of rule.
So you can create rules with conditions, that are not executed in the promotions. This results in errors without error messages.
Therefore, only Rule Builder conditions should be available that match the type of rule.
2 votes -
New layout block "Accordion"
Designing a lot of text for various topics in an appealing way is not easy. An accordion is very helpful in making a lot of content more accessible to the customer. Often used for FAQ or documentation it has established itself as a standard design element in online shops and is therefore an element that should be within reach in the shopping experiences default blocks.
2 votes -
Rule for user agent
As a store owner, I want to be able to show different prices to customers who are on a mobile phone than to customers on a desktop. For this, I need the possibility to have the user agent as an option in the rule builder.
3 votes
- Don't see your idea?